Chemical composition and physical properties

Depending upon species, age, and type of bone, bone cells represent up to 15 percent of the volume of bone; in mature bone in most higher animals, they usually represent only up to 5 percent. The nonliving intercellular material of bone consists of an organic component called collagen (a fibrous protein arranged in long strands or bundles similar in structure and organization to the collagen of ligaments, tendons, and skin), with small amounts of proteinpolysaccharides, glycoaminoglycans (formerly known as mucopolysaccharides) chemically bound to protein and dispersed within and around the collagen fibre bundles, and an inorganic mineral component in the form of rod-shaped crystals. These crystals are arranged parallel with the long axes of collagen bundles and many actually lie in voids within the bundles themselves. Organic material constitutes 50 percent of the volume and 30 percent of the dry weight of the intercellular composite, with minerals making up the remainder. The major minerals of the intercellular composite are calcium and phosphate. When first deposited, mineral is crystallographically amorphous, but with maturation it becomes typical of the apatite minerals, the major component being hydroxyapatite. Carbonate is also present—in amounts varying from 4 percent of bone ash in fish and 8 percent in most mammals to more than 13 percent in the turtle—and occurs in two distinct phases, calcium carbonate and a carbonate apatite. Except for that associated with its cellular elements, there is little free water in adult mammalian bone (approximately 8 percent of total volume). As a result, diffusion from surfaces into the interior of the intercellular substance occurs at the slow rates more typical of diffusion from surfaces of solids than within liquids.

The mineral crystals are responsible for hardness, rigidity, and the great compressive strength of bone, but they share with other crystalline materials a great weakness in tension, arising from the tendency for stress to concentrate about defects and for these defects to propagate. On the other hand, the collagen fibrils of bone possess high elasticity, little compressive strength, and considerable intrinsic tensile strength. The tensile strength of bone depends, however, not on collagen alone but on the intimate association of mineral with collagen, which confers on bone many of the general properties exhibited by two-phase materials such as fibre glass and bamboo. In such materials the dispersion of a rigid but brittle material in a matrix of quite different elasticity prevents the propagation of stress failure through the brittle material and therefore allows a closer approach to the theoretical limiting strength of single crystals.

The fine structure of bone has thus far frustrated attempts to determine the true strength of the mineral-matrix composite at the “unit” structural level. Compact (cortical) bone specimens have been found to have tensile strength in the range of 700–1,400 kg per square cm (10,000–20,000 pounds per square inch) and compressive strengths in the range of 1,400–2,100 kg per square cm (20,000–30,000 pounds per square inch). These values are of the same general order as for aluminum or mild steel, but bone has an advantage over such materials in that it is considerably lighter. The great strength of bone exists principally along its long axis and is roughly parallel both to the collagen fibre axis and to the long axis of the mineral crystals.

Although apparently stiff, bones exhibit a considerable degree of elasticity, which is important to the skeleton’s ability to withstand impact. Estimates of modulus of elasticity of bone samples are of the order of 420 to 700 kg per square cm (6,000 to 10,000 pounds per square inch), a value much less than steel, for example, indicating the much greater elasticity of bone. Perfect elasticity exists with loads up to 30 to 40 percent of breaking strength; above this, “creep,” or gradual deformation, occurs, presumably along natural defects within the bony structure. The modulus of elasticity in bone is strikingly dependent upon the rate at which loads are applied, bones being stiffer during rapid deformation than during slow; this behaviour suggests an element of viscous flow during deformation.

As might be anticipated from consideration of the two-phase composition of bone, variation in the mineral-collagen ratio leads to changes in physical properties: less mineral tends ultimately to greater flexibility and more mineral to increased brittleness. Optimal ratios, as reflected in maximal tensile strength, are observed at an ash content of approximately 66 percent, a value that is characteristic of the weight-bearing bones of mammals.