Other types of lava caves

print Print
Please select which sections you would like to print:
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Share
Share to social media
URL
https://mainten.top/science/cave
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

Also known as: cavern
Also called:
cavern
Key People:
René Jeannel

Small caves are produced in regions of active volcanism by at least three other processes. These are (1) pressure-ridge caves, (2) spatter cone chambers, and (3) blister caves.

The solidified crust of pahoehoe flows often buckles from the movement of lava underneath. The buckled crust appears as ridges several metres to a few tens of metres high, elongated perpendicular to the flow. So-called pressure-ridge caves can be formed beneath the ridges by the mechanical lifting of the roof rock. Such cavities typically measure one to two metres in height, have a roughly triangular cross section, and extend several hundred metres in length. Unlike lava tube caves that are oriented along the flow, pressure-ridge caves are oriented perpendicular to the flow.

Liquid lava can be forced upward through cracks in the congealed surface layers of the flow. When the ejected blobs of liquid freeze and weld together, they form spatter cones. If the lava subsequently drains from the feeder channel, a dome-shaped chamber is formed beneath such a cone. The depths of these spatter cone pits range from several metres to a few tens of metres.

Trapped steam or other gases can lift layers of lava while it is still in a plastic state to form small blister caves. These cavities consist of dome-shaped chambers somewhat resembling those of spatter cones. They are generally small, ranging from one to a few metres in diameter, but they often occur in great numbers in many lava flows rich in volatile components.

In the United States lava caves are found chiefly in the Pacific Northwest—northern California, Washington, Oregon, and Idaho—and in Hawaii. One of the longest (measuring 3.4 kilometres) is Ape Cave on the flank of Mount St. Helens in Washington. The cave is located on the side of the volcano opposite that involved in the catastrophic eruption of 1980 and so survived the outburst. Ape Cave is only one fragment of a series of interrelated lava tubes that mark a continuous flow path down the volcano. A large number of lava tubes also occur beneath a nearly flat plain in the Bend region of central Oregon. Many of these are related to fissure eruptions rather than to a single volcanic cone. Lava tubes are commonly found in other young volcanic regions of the world, notably in the Canary Islands, on Iceland, along the East African Rift Valley, and in parts of Australia.

Tectonic caves

Tectonic caves are formed by a mass movement of the bedrock. The rocks separate along joints or fractures, and are pulled apart mechanically. The resulting cave is usually a high, narrow fissure that has nearly planar walls with matching patterns on opposite sides of the passage. The ceiling is often a flat bed of rock that did not move or that moved along some different fracture. The floor of a tectonic cave may consist of massive bedrock or of a rubble of fallen blocks, or it may be covered with soil and other material washed in from the surface.

Because tectonic caves are formed by mechanical processes, the most important characteristic of the bedrock is that it be mechanically strong. Massive, brittle rocks such as sandstones and granites are the best host rocks for tectonic caves.

Although tectonic caves can be formed by any geologic force that causes rocks to move apart, the key mechanism is gravity sliding. The optimum setting for the development of tectonic caves occurs where massive rocks dip gently to the sides of ridges or mountains. The presence of shale layers between beds of massive sandstone can act as a lubricating layer and facilitate mechanical slippage. Gravity causes the massive rocks to slip and separate along vertical fractures, which then become tectonic caves. The amount of slippage must be small for the cave to maintain its roof. Too much slippage and consequent roof collapse will form an open canyon. Still more slippage can result in a landslide.

Tectonic caves occur in many geologic settings and in great numbers, since they are produced by minor slippages in outcrops of massive sandstones, granites, basalts, and even limestone. Tectonic caves are among the most common caves, but they are rarely noticed or catalogued. They contain few, if any, features that attract attention and usually are quite small. Most such caves measure from several metres to a few hundred metres in length. Many of them consist of a single passage that extends into hillsides along major fractures. Some of the larger tectonic caves have a grid or network pattern that matches the pattern of the fractures or joints.

Major caves and cave systems

The world’s major caves and cave systems are listed by continent in the table.

Major caves and cave systems of the world
by continent
*Below highest entrance.
**Explored portion of cave.
Source: Bob Gulden, National Speleological Society.
depth*     length**  
name and location feet metres miles km
Africa
Boussouil, Algeria 2,641 805 2.0 3.2
Ifflis, Algeria 3,839 1,170 1.2 2.0
Tafna Boumaza, Algeria 11.4 18.4
Tamdoun, Morocco 11.4 18.4
Asia
Air Jernih, Malaysia 1,165 355 109.2 175.7
Illyuzia-Mezhonnogo-Snezhnaya, Georgia 5,751 1,753 15.0 24.1
Krubera, Georgia 7,188 2,191 8.2 13.2
Shuanghe Dongqun, China 1,946 593 74.4 119.8
Australia and Oceania
Bullita, Northern Territory, Australia 75 23 68.1 109.6
Mamo Kananda, Papua New Guinea 1,732 528 34.1 54.8
Neide-Muruk, Papua New Guinea 4,127 1,258 10.6 17.0
Nettlebed, New Zealand 2,917 889 15.1 24.3
Europe
Gouffre Mirolda–Lucien Bouclier, France 5,335 1,626 8.1 13.0
Hölloch, Switzerland 3,079 939 120.9 194.5
Lamprechtsofen Vogelschacht, Austria 5,354 1,632 31.7 51.0
Optimisticheskaya, Ukraine 49 15 143.0 230.1
North America
Cuicateco, Mexico 4,869 1,484 16.3 26.2
Huautla, Mexico 4,839 1,475 38.6 62.1
Jewel, South Dakota 632 193 144.8 233.1
Mammoth–Flint Ridge, Kentucky 379 116 367.0 590.6
South America
Aonda, Venezuela 1,188 362
Barriguda, Brazil 200 61 18.6 30.0
Boa Vista, Brazil 164 50 63.7 102.5
Kaukiran, Peru 1,335 407 1.3 2.1
William B. White