Finishing synthetic detergents
The largest quantities of synthetic detergents are consumed in the household in the form of spray-dried powders. They are produced from an aqueous slurry, which is prepared continuously or in batches and which contains all the builder components. Builders, consisting of certain alkaline materials, are almost universally present in laundry soaps. These materials give increased detergent action. The most important are sodium silicate (water glass), sodium carbonate (soda ash), and various phosphates; the latter have contributed to the problem of wastewater pollution by contributing nutrients that sustain undesirable algae and bacteria growth, and much work has been done to find acceptable builders to replace, at least partially, phosphates, the use of which was banned in most Western countries. The slurry is atomized in heat to remove practically all the water. The powder thus obtained consists of hollow particles, called beads, that dissolve quickly in water and are practically dust free. Another portion of the syndets is transformed into liquid detergent products and used primarily for hand dishwashing. Although syndet pastes are seldom produced, solid products, manufactured in the same way as bath or laundry soap, have been sold in increasingly greater quantity. Sodium perborate is sometimes added to the spray-dried beads to increase cleaning power by oxidation. Enzymes may be added as well. Many modern washing powders combine synthetic detergents, anionic and nonionic, with soap to give maximum efficiency and controlled foam for use in household washing machines.
A.S. Davidsohn