bathyscaphe

diving vessel
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Share
Share to social media
URL
https://mainten.top/technology/bathyscaphe
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

Key People:
Auguste Piccard
Jacques Piccard
Related Topics:
Trieste
submersible

bathyscaphe, navigable diving vessel, developed by the Swiss educator and scientist Auguste Piccard (with assistance in later years from his son Jacques), designed to reach great depths in the ocean.

The first bathyscaphe, the FNRS 2, built in Belgium between 1946 and 1948, was damaged during 1948 trials in the Cape Verde Islands. Substantially rebuilt and greatly improved, the vessel was renamed FNRS 3 and carried out a series of descents under excellent conditions, including one of 4,000 metres (13,000 feet) into the Atlantic off Dakar, Senegal, on February 15, 1954. A second improved bathyscaphe, the Trieste, was launched on August 1, 1953, and dived to 3,150 metres (10,300 feet) in the same year. In 1958 the Trieste was acquired by the United States Navy, taken to California, and equipped with a new cabin designed to enable it to reach the seabed of the great oceanic trenches. Several successive descents were made into the Pacific by Jacques Piccard, and on January 23, 1960, Piccard, accompanied by Lieutenant Don Walsh of the U.S. Navy, dived to a record 10,916 metres (35,814 feet) in the Pacific’s Mariana Trench.

The bathyscaphe consists of two main components: a steel cabin, heavier than water and resistant to sea pressure, to accommodate the observers; and a light container called a float, filled with gasoline, which, being lighter than water, provides the necessary lifting power. The cabin and float are closely linked. On the surface, one or more ballast tanks filled with air provide enough lift to keep the bathyscaphe afloat. When the ballast tank valves are opened, air escapes and is replaced by water, making the whole device heavy enough to start its descent. The gasoline is in direct contact with the sea water and so is compressed at a rate almost exactly in proportion to the prevailing depth. Thus, the bathyscaphe gradually loses buoyancy as it descends, and the speed of its descent tends to increase rapidly. To slow down or to begin the reascent, the pilot releases ballast that consists essentially of iron shot stored in silos and held in place by electromagnets.

This article was most recently revised and updated by Amy Tikkanen.