Table of Contents
References & Edit History Quick Facts & Related Topics

Ships in waves

verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

print Print
Please select which sections you would like to print:
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

Also known as: marine engineering

Considered as the environment for boats and ships of all kinds and sizes, the term sea is used to denote all waters large enough for the operation of these craft, from creeks and ponds to lakes and oceans. The wind and the ships moving across the sea create a pattern of undulations ranging from minute ripples to waves of gigantic size. The currents moving through it must also be taken into account in all ship operations and in some ship-design problems. The variations in density, resulting from the amount of salts in solution, determine the variable-ballast tank capacity of submarines and the ability of a submarine to “sit” on a layer of dense water while largely supported by a less dense layer above.

Considering the overall surface configuration, termed the seaway, the classical concept of a train of regular waves is highly unrealistic, but it has some practical uses. The normal seaway is highly irregular, with waves of different heights and lengths traveling in many directions. For analytic purposes, it may be considered as made up of a multitude of very low waves, having a wide range of lengths and periods and traveling in various directions, superposed to produce the actual seaway. When this is done, a useful approach is to use statistical methods to define the seaway by its spectrum, which indicates the amplitudes of its many (theoretically infinite) wave components.

The sea is also home to teeming masses of marine life, many of which are detrimental to ships. Marine borers attack wood exposed on underwater portions of the hull. Barnacles cling to the underwater hull, roughening its surface and increasing the ship’s resistance to travel through the water. Sea water is highly corrosive to most materials, and severe electrochemical effects cause rapid disintegration of submerged metals that are unprotected.

Ship motions in waves

Treated as a rigid body, a ship partakes of six oscillatory motions in a seaway. Three are translatory motions of the whole ship in one direction: (1) surge is the oscillation of the ship fore and aft; (2) sway is the motion from side to side; and (3) heave is the up-and-down motion. The other three oscillations are rotary: (4) roll is the angular rotation from side to side about a fore-and-aft axis; (5) pitch is the bow-up, bow-down motion about an athwartships axis; and (6) yaw is the swing of the ship about a vertical axis. Yawing is not necessarily oscillatory for every service condition. All six of these motions can and do take place simultaneously in a confused sea, so the situation is most complex.

The forces and moments caused by waves are balanced by three types of forces and moments opposing them: (1) those inertia reactions developed by the acceleration of the ship and cargo and the adjacent water; (2) those that result in damping the oscillatory ship motion or reducing its extent by the generation of surface gravity waves, eddies, vortexes, and turbulence; the energy required for setting up these disturbances is carried away and lost; (3) those of hydrostatic nature that act to restore the ship to a position of equilibrium as, for example, when the ship rolls to an angle greater than that called for by the exciting moment.

The behaviour of a ship in waves is too complex for the motions in all six degrees of freedom to be completely described mathematically. However, the longitudinal motions of pitching and heaving can be treated as a coupled system (neglecting surging), under the assumption that lateral motions do not exist at the same time or are reduced by stabilization to minimal values. Similarly, rolling can be treated along with heaving and swaying on the assumption that pitch and heave do not occur or have negligible effect. Equations of motion can then be set up that equate the wave exciting forces and moments to the three types of forces associated with the motions that were described above.

The theory of rolling was developed in the 19th century by Froude. The theory of coupled pitching and heaving is more recent, stimulated by the work of Boris Korvin-Kroukovsky in the 1950s, who applied a so-called “strip” method in which the ship was divided longitudinally into strips or segments. The total force and moment acting on the ship and the resulting motions were assumed to be the result of the integration of all the forces in the individual strips without appreciable interference. Model tests in many laboratories have confirmed the basic soundness of this approach, although refinements are continually being made. Computer programs for solving the equations and calculating the pitch-heave motions of any ship are commonly used in the design stage.

The pioneering work of Manley St. Denis and Willard J. Pierson, Transactions of the Society of Naval Architects and Marine Engineers (1953), showed how the motions of a ship in an irregular seaway can be statistically described by assuming that the irregular motions are the sum of the ship’s response to all the regular component waves of the seaway described by its spectrum. This powerful tool has permitted the extension of calculated motions (or those measured in a model tank) to the prediction of realistic irregular sea responses and hence to the comparative evaluation of alternative ship designs under realistic conditions.

Work by various investigators along the above lines has shown that longitudinal weight distribution and overall ship proportions have a much greater effect than details of hull form on pitching and heaving, and on the associated shipping of water, slamming, and high accelerations. In general, a short pitching period in relation to ship length is found to be advantageous in raising the limit of speed in rough head seas. This suggests concentration of heavy weights amidships, if possible, and favours long, slender hulls over short, squat ones.