Etching and finishing
Nitric acid is commonly used in etching zinc and magnesium, the strength varying from 6 to 15 percent, depending on the metal. Copper is more readily attacked by ferric chloride (iron chloride), which is commonly used in concentrations of 28–45 percent. The etching may be done in an open tub or tray, though this method does not give the control needed for economical operation and is employed only where control is not critical. Most quality work is carried out in etching machines provided with impellers that break up the etchant into a spray and force it against the plate.
In the conventional etching processes, the acid or iron chloride is used without modification, although great care is needed to prevent overetching. In many cases, especially when making line plates, etchers powder to protect the upper printing areas from attack while continuing to etch in depth. The powderless etching processes, described earlier, have made the powdering technique obsolete and are now almost universally in use. Line plates are usually etched to depths of 0.010 to 0.045 inch. Halftones may be etched to depths of 0.0023 to 0.009 inch, depending on the fineness of the screen. Coarser screens are etched deeper.
Photosensitive plastic plates are not etched in the ordinary sense. Unexposed resins, from nonprinting areas, are washed out with either dilute alkali or alcohol. Overetching is not a problem with this type of plate.
Finishing includes hand operations with engravers’ tools, to remove imperfections in the image area of the plate and to improve its appearance. In colourplates, finishing also includes colour correction, a process of further etching or burnishing selected areas to improve the fidelity of reproduction. Finally, unwanted metal in the nonprinting areas of the plate is removed by a mechanical routing machine.
Blocking and proofing
Blocking consists of attaching the plates to cherry wood, plywood, or metal blocks to bring the printing surface to type height, which is 0.918 inch. Until the development of thermoplastic adhesives in the 1940s, blocking was always done by nailing the plates to wooden blocks. This tedious and costly operation has been largely replaced by hot mounting, in which process the plate is placed on a block of wood precoated with adhesive and this sandwich is subjected to heat and pressure. Upon cooling, the plate adheres firmly to the block.
Proofing consists in placing the plates on a precision press and taking sample impressions, or proofs, that show how the plates will print during a regular press run.
Colourplate production
The first printed colour work was produced manually; artists painted in the necessary colours on black-and-white printed sheets. Later, stencils were used to speed this work, and in a further development, colours were printed, either as solids or tints, from hand-engraved plates. All of the work was crude by modern standards, however, and nothing approaching four-colour process printing was possible.
Modern colour printing, done with either three or four plates, each using a different colour of ink and overprinting the others, is based on a subtractive system of colours in which intermediate hues are obtained by some combination of two or more of the subtractive, or secondary, colours. The best colour printing is usually done with four process colours: yellow, magenta (blue-red), cyan (blue-green), and black.
The black plate is used to provide added uniformity of colour reproduction, since it will overcome changes in hue of critical neutral tones that could occur with random or cyclic variations in the amount of ink being transferred to the plate from the press inking system. Further, the use of a black plate aids in maintaining sharpness of picture detail.
In theory, black should result whenever the three subtractive colours are superimposed. Thus, it should be possible to produce black wherever all three of the secondary colours are present without affecting reproduction. Further, any colour that is within the range of colours reproducible with inks on paper can theoretically be obtained by using only black plus the proper pair of the secondary colours. But this has not been found practical because of the nature of printing ink pigments and the lack of total precision in the printing operation. Consequently, it is common practice to use the black plate to supplement the colourplates, portions of which are allowed to print in all except pure white areas of an illustration. The colourplates and the black plate must all be printed in register; i.e., they must be superimposed so that identical portions of the image in each plate colour overprint each other.