- Related Topics:
- food processing
- fruit
The making of jellies and other preserves is an old and popular process, providing a means of keeping fruits far beyond their normal storage life and sometimes making use of blemished or off-grade fruits that may not be ideal for fresh consumption. In jelly making, the goal is to produce a clear, brilliant gel from the juice of a chosen fruit. Jams are made from the entire fruit, including the pulp, while preserves are essentially jellies that contain whole or large pieces. Marmalade, usually made from citrus fruit, is a jellylike concentrate of prepared juice and sliced peel.
The essential ingredients for a successful preserve are sugar, acid, and pectin. These three ingredients lower the pH of the preserve and bind available water, thus creating an environment in which the growth of microorganisms is retarded. In some cases the fruit can provide all the pectin and acid that are needed. If the acid content of the fruit is low, external sources such as lemon juice can be added. Similarly, if the planned mix of fruit is low in pectin, a commercial source may be used. Sugar is always added, and in general all of the three essential ingredients have to be added in order to create a successful product.
The making of preserves begins with an initial mix containing not less than 45 parts by weight fruit for every 55 parts by weight sugar solids. The sugar solids are added after the fruit is crushed, and the mix is then cooked. Cooking may be done in a highly controlled vacuum kettle, in which flavour volatiles are captured and returned to the product. The cooking process continues until the heated mix is concentrated to a predetermined level of soluble solids. A generally accepted level is 65 percent soluble solids; at this concentration the boiling temperature is 7° to 12° above the boiling point of water. The product is then transferred to containers and sealed as a shelf-stable product.
The exact amount of sugar needed depends on the acidity level, the natural sugar content, and the type of product desired. If sugar content is too low, the resulting jelly will be tough; excessive sugar, on the other hand, will create a “soft set” that can be broken easily. Appropriate amounts of acid and pectin are added during the cooking process. The pH must be adjusted to an acidic level of approximately 3.1. Increased acidity reduces the amount of sugar needed in the blend, although excessive acidity can cause syneresis, or a separation of liquid from the gel. If the pectin level is inadequate, then the preserve will not “set”; that is, not enough water will be bound to create a complete gel.
Fruit preservation
Since fruits are generally acidic, they are naturally amenable to preservation. The premier role of acidity in preservation is to stop bacterial growth. Second, increased acidity can activate chemical reactions such as pectin set, which lowers water activity and reduces the possibility of microbial growth.
Dehydration
Dehydration is among the oldest and most common forms of fruit preservation. In dehydration, moisture in the fruit is driven off, leaving a stable food that has a moisture content below that at which microorganisms can grow. There are three basic systems for dehydration: sun drying, such as that used for raisins; hot-air dehydration; and freeze-drying.
Dehydration has a number of advantages. Dehydrated fruit has a virtually unlimited shelf life when held under proper storage conditions. Drying does not significantly reduce the calories or minerals, and vitamin losses are similar to other preservation methods. In addition, by reducing the weight and the need for refrigeration, handling and transportation costs can be reduced dramatically. Dehydrated fruits are typically reduced in weight by 75 to 90 percent.
Although dehydration offers a convenient product form, it usually requires a careful inactivation of enzymes. This is usually accomplished by blanching of the fruit or by chemical inactivation. Typically, sulfur dioxide is added for its antioxidant and preservative effects. In order to control browning, the fruit is often treated prior to dehydration with sodium sulfite and sodium bisulfite.
Thermal processes
In thermal processing, heat is used to destroy spoilage organisms and to inactivate troublesome enzymes. Enzymes are typically responsible for browning, softening, and the development of off-flavours. For high-acid fruit products the most typical thermal process is canning, in which fruit or fruit products are hot-filled or heated in a hermetically sealed container. The process temperature is generally in the range of 88 °C (190 °F).
Chemical preservation
Chemicals also can be used as a preservative, either through artificial addition or through the action of microorganisms. An example of the latter method is yeast fermentation, which can cause an increase in ethyl alcohol sufficient to preserve the fruit product. Pickling is another example of chemical preservation. In the case of pickling, the product may be preserved by the addition of salt, sugar, acetic acid (vinegar), and alcohol. High sugar content also acts as a fruit preservative by tying up all available moisture so that microorganisms cannot grow.
Irradiation
Although irradiation is an expensive method, it has been shown to be an effective means of extending the shelf life of fresh fruits. Irradiated fruit products have not been well received by the public, even in light of evidence supporting the healthfulness and safety of such foods.
Freezing
Freezing of fruits and fruit products is a common consumer practice. Cold temperatures act to retard the spoilage of fruit by inhibiting microbial action and slowing metabolic processes. In order to achieve extended storage life, the product must be held well below the freezing point of water—typically at a minimum of −23 °C (−10 °F). Generally, rapid freezing leads to an improved texture upon thawing.
A prerequisite for effective freezing is inactivation of fruit enzymes. Traditionally, this is done through blanching or by the addition of a chemical. Blanching consists of heating the fruit for a short time in water or steam prior to cooling and subsequent freezing. The blanch step is intended to inactivate enzyme systems responsible for off-flavours, browning, and softening.
Mark R. McLellan