intaglio
- Key People:
- Betye Saar
- Related Topics:
- etching
- engraving
- gravure printing
- à la poupée
- metal graphic
intaglio, in visual arts, one of the four major classes of printmaking techniques, distinguished from the other three methods (relief printing, stenciling, and lithography) by the fact that the ink forming the design is printed only from recessed areas of the plate. Among intaglio techniques are engraving, etching, drypoint, aquatint, and mezzotint (qq.v.).
Intaglio printing is the opposite of relief printing, in that the printing is done from ink that is below the surface of the plate. The design is cut, scratched, or etched into the printing surface or plate, which can be copper, zinc, aluminum, magnesium, plastics, or even coated paper. The printing ink is rubbed into the incisions or grooves, and the surface is wiped clean. Unlike surface printing, intaglio printing—which is actually a process of embossing the paper into the incised lines—requires considerable pressure. Intaglio processes are probably the most versatile of the printmaking methods, as various techniques can produce a wide range of effects.
Virtually all intaglio plates are printed by similar means, using a roller press. This is essentially composed of two bearing rollers with a movable flatbed sandwiched horizontally between them. A viscous ink is forced into the incisions of the intaglio plate with a roller, and the excess ink is wiped away. The inked plate is laid face up on the bed, a sheet of wet printing paper is laid over it, and a blanket (to ensure even pressure) is draped over them both. Then the upper roller of the press is turned and the bed is drawn through; a pressure of several tons transmitted through the blanket presses the wet paper into the ink-filled crevices of the plate, thus producing the printed image.
There are two ways of making intaglio prints in varied colours. In the method known as à la poupée (French: “with the doll”), a doll-shaped bundle of fabric is used to apply different colours to different areas of a single plate, which is then printed in the usual way. In the other method separate plates, each carrying a different colour, are successively overprinted on a single sheet of paper. When this multiple-plate method is used, the printer must be careful to ensure that each successive colour falls in its precise location. The most precise method of ensuring colour registration involves the use of pinholes to check alignment.