Fuel types
News •
A reactor’s fuel must conform to the integral design of the reactor as well as the mechanisms that drive its operations. Following are brief descriptions of the fuel materials and configurations used in the most important types of nuclear reactors, which are described in greater detail in Types of reactors.
The light-water reactor (LWR), which is the most widely used variety for commercial power generation in the world, employs a fuel consisting of pellets of sintered uranium dioxide loaded into cladding tubes of zirconium alloy or some other advanced cladding material. The tubes, called pins or rods, measure approximately 1 cm (less than half an inch) in diameter and roughly 3 to 4 metres (10 to 13 feet) in length. The tubes are bundled together into a fuel assembly, with the pins arranged in a square lattice. The uranium used in the fuel is 3 to 5 percent enriched. Since light (ordinary) water, used in LWRs as both the coolant and the moderator, tends to absorb more neutrons than other moderators do, such enrichment is crucial.
The CANDU (Canada Deuterium Uranium) reactor, which is the principal type of heavy-water reactor, uses natural uranium compacted into pellets. These pellets are inserted in long tubes and arranged in a lattice. A CANDU reactor fuel assembly measures approximately 1 metre (almost 40 inches) in length. Several assemblies are arranged end-to-end within a channel inside the reactor core. The use of heavy water rather than light water as the moderator enhances the scattering of neutrons rather than their capture, thereby increasing the probability of fission with the fuel material.
In one version of the high-temperature graphite reactor, the fuel is constructed of small spherical particles, or microspheres, containing uranium dioxide at the centre with concentric shells of carbon, silicon carbide, and carbon around them. These shells serve as localized cladding for each fuel sphere. The particles are then mixed with graphite and encased in a macroscopic graphite cladding.
In a sodium-cooled fast reactor, commonly called a liquid-metal reactor (LMR), the fuel consists of uranium dioxide or uranium-plutonium dioxide pellets (French design) or of uranium-plutonium-zirconium metal alloy pins (U.S. design) in steel cladding.
The most common type of fuel used in research reactors consists of plates of a uranium-aluminum alloy with an aluminum cladding. The uranium is enriched to slightly less than 20 percent, while silicon and aluminum are included in the “meat” of the plate to serve as the diluent and fuel matrix. Although aluminum has a lower melting point than other cladding materials, the flat plate design maintains a low fuel temperature, as the plates are often barely more than 1.25 mm thick. A common variety of research reactor known as TRIGA (from training, research, and isotope-production reactors–General Atomic) employs a fuel of mixed uranium and zirconium hydride, often doped with small concentrations of erbium and the whole clad in stainless steel.
Coolants and moderators
A variety of substances, including light water, heavy water, air, carbon dioxide, helium, liquid sodium, liquid sodium-potassium alloy, and hydrocarbons (oils), have been used as coolants. Such substances are, in general, good conductors of heat, and they serve to carry the thermal energy produced by fission from the fuel and through the integral system, finally either venting the heat directly to the atmosphere (in the case of research reactors) or transporting it to the steam-generating equipment of the nuclear power plant (in the case of power reactors).
In many cases, the same substance functions as both coolant and moderator, as in the case of light and heavy water. The moderator slows the fast (high-energy) neutrons emitted during fission to energies at which they are more likely to induce fission. In doing so, the moderator helps initiate and sustain a fission chain reaction.
Reflectors
A reflector is a region of unfueled material surrounding the core. Its function is to scatter neutrons that leak from the core, thereby returning some of them back into the core. This design feature allows for a smaller core size. In addition, reflectors “smooth out” the power density by utilizing neutrons that would otherwise leak out through fissioning within fuel material located near the core’s outer region.
The reflector is particularly important in research reactors, since it is the region in which much of the experimental apparatus is located. In some research reactor designs, reflectors are located inside the core as central islands in which high neutron intensities can be achieved for experimental purposes.
In most types of power reactors, a reflector is less important; this is due to the reactor’s large size, which reduces the proportion of neutrons that may leak from the core region. The liquid-metal reactor represents a special case. Most sodium-cooled reactors are deliberately built to allow a large fraction of their neutrons—those not needed to maintain the chain reaction—to leak from the core. These neutrons are valuable because they can produce new fissile material if they are absorbed by fertile material. Thus, fertile material—generally depleted uranium or its dioxide—is placed around the core to catch the leaking neutrons. Such an absorbing reflector is referred to as a blanket or a breeding blanket.
Reactor control elements
All reactors need unique elements for control. Although control can be achieved by varying parameters within the coolant circuit or by varying the amount of absorber dissolved in the coolant or moderator, by far the most common method utilizes absorbing assemblies—namely, control rods or, in some cases, blades. Typically a reactor is equipped with three types of rods for different purposes: (1) safety rods for starting up and shutting down the reactor, (2) regulating rods for adjusting the reactor’s power rate, and (3) shim rods for compensating for changes in reactivity as fuel is depleted by fission and neutron capture.
The most important function of the safety rods is to shut down the reactor, either when such a shutdown is scheduled or in case of a real or suspected emergency. These rods contain enough absorber to terminate a chain reaction under any conceivable condition. They are withdrawn before fuel is loaded and remain available in case a loading error requires their action. After the fuel is loaded, the rods are inserted, to be withdrawn again when the reactor is ready for operation. The mechanism by which they are moved is designed to be fail-safe in the sense that if there is a mechanical failure, the safety rods will fall by gravity or some other safe means into the core. In some cases, moreover, the safety rods have an automatic feature, such as a fuse, which releases them by virtue of physical effects independent of electronic signals.
Regulating rods are deliberately designed to affect reactivity only by a small degree. It is assumed that at some time the rods might be totally withdrawn by mistake, and the idea is to keep the added reactivity in such cases well within sensible limits. A well-designed regulating rod will add so little reactivity when it is removed that the delayed neutrons (see above Reactor control) will continue to control the rate of power increase.
Shim rods are designed to compensate for the effects of burnup (i.e., energy production). Reactivity changes resulting from burnup can be large, but they occur slowly over periods of days to years, as compared with the seconds-to-minutes range over which safety actions and routine regulation take place. Therefore, shim rods may control a significant amount of reactivity, but they will work optimally only when constraints are imposed on their speed of movement. A common way in which shims are operated is by inserting or removing them as regulating rods reach the end of their most useful position range. When this happens, shim rods are moved so that the regulating rods can be reset.
The functions of shim and safety rods are sometimes combined in rods that have low rates of withdrawal but that can be rapidly inserted. This is usually done when the effect of burnup decreases reactivity. The rods are only partially inserted at the outset of operation. However, in the event that the system must be shut down as quickly as possible, the reactor operator may “scram” the reactor, fully dropping the control rods into the core and immediately sending the reactor into a subcritical state. (The expression “scram” is said to stand for “safety control rod axe man,” a reference to ad-hoc emergency preparations made for the earliest nuclear reactor.)
The amount of shim control required can be reduced by the use of a burnable “poison.” This is a neutron-absorbing material, such as boron or gadolinium, that burns off faster than the fissile material does over the lifetime of the core. At the beginning of operation, the inclusion of a burnable poison regulates the extra reactivity that has been built into the fuel to compensate for the amount of fuel consumed. At the end of an operating period, the absorbing material is often completely transformed through neutron capture.
Some boiling-water reactors utilize cruciform (T-shaped) control blades as the neutron-absorbing control mechanism. Because a number of these reactor vessels are designed with internal components above the core region, the control blades are inserted from below the core. Control blades operate on the same principle as control rods. However, since they are inserted upward into the core, they cannot use gravity to fall into place and put the reactor into a subcritical state in the event of a loss of power or some other abnormal condition. For this reason, control blades are connected to hydraulic drives that force compressed air into the mechanism upon initiation, injecting the control blades into the core.
Structural components
The structural components of a reactor hold the system together and permit it to function as a useful energy source. The most important structural component in a nuclear power plant is usually the reactor vessel. In both the light-water reactor and the high-temperature gas-controlled reactor (HTGR), a reactor pressure vessel (RPV) is utilized so that the coolant is contained and operated under conditions appropriate for power generation—namely, elevated temperature and pressure. Within the reactor vessel are a number of structural elements: grids for holding the reactor core and solid reflectors, control-rod guide tubes, internal thermal hydraulic components (e.g., pumps or steam circulators) in some cases, instrument tubes, and components of safety systems.