Walking and running
Only arthropods (e.g., insects, spiders, and crustaceans) and vertebrates have developed a means of rapid surface locomotion. In both groups, the body is raised above the ground and moved forward by means of a series of jointed appendages, the legs. Because the legs provide support as well as propulsion, the sequences of their movements must be adjusted to maintain the body’s centre of gravity within a zone of support; if the centre of gravity is outside this zone, the animal loses its balance and falls. It is the necessity to maintain stability that determines the functional sequences of limb movements, which are similar in vertebrates and arthropods. The apparent differences in the walking and slow running gaits of these two groups are caused by differences in the tetrapodal (four-legged) sequences of vertebrates and in the hexapodal (six-legged) or more sequences of arthropods. Although many legs increase stability during locomotion, they also appear to reduce the maximum speed of locomotion. Whereas the fastest vertebrate gaits are asymmetrical, arthropods cannot have asymmetrical gaits, because the movements of the legs would interfere with each other.
Cycle of limb movements
The cycle of limb movements is the same in both arthropods and vertebrates. During the propulsive, or retractive, stage, which begins with footfall and ends with foot liftoff, the foot and leg remain essentially stationary as the body pivots forward over the leg. During the recovery, or protractive, stage, which begins with foot liftoff and ends with footfall, the body remains essentially stationary as the leg moves forward. The advance of one leg is a step; a stride is composed of as many steps as there are legs. During a stride, each leg passes through one complete cycle of retraction and protraction, and the distance that the body travels is equal to the longest step in the stride. The speed of locomotion is the product of stride length and duration of stride. Stride duration is directly related to retraction: the longer the propulsive stage, the more time is required to complete a stride and the slower is the gait. A gait is the sequence of leg movements for a single stride. For walking and slow running, gaits are generally symmetrical—i.e., the footfalls are regularly spaced in time. The gaits of fast-running vertebrates, however, tend to be asymmetrical—i.e., the footfalls are irregularly spaced in time.
The different gaits of insects are based on the synchrony of leg movements on the left (L) and right (R) sides of the animal. The wave of limb movement for each side passes anteriorly; the posterior leg protracts first, then the middle leg, and finally the anterior leg, producing the sequence R3 R2 R1 or L3 L2 L1. There is no limb interference, because the legs of one side do not have footfalls along the same longitudinal axis. The slowest walking gait of insects is the sequence R3 R2 R1 followed by the sequence L3 L2 L1. As the rate of protraction increases, the protractive waves of the right and left sides begin to overlap. Eventually, the top speed is reached when the posterior and anterior legs of one side move synchronously. This gait occurs because the protraction times for all legs are constant, the intervals between posterior and middle legs and between middle and anterior legs are constant, and the interval between posterior and anterior legs decreases with faster movements. Other gaits are possible in addition to those indicated above by altering the synchrony between left and right sides.
The limb movements of centipedes and millipedes follow the same general rules as those of insects. The protraction waves usually pass from posterior to anterior. Because each leg is slightly ahead of its anteriorly adjacent leg during the locomotory cycle, one leg touches down or lifts off slightly before its anteriorly adjacent one. This coordination of limb movement produces metachronal waves, the frequency of which equals the duration of the complete protractive and retractive cycle. The length of the wave is directly proportional to the phase lag between adjacent legs.
Whereas the millipedes must synchronize leg movements to eliminate interference, the tetrapodal vertebrates must synchronize leg movements to obtain maximum stability. Four legs are the minimum requirement for symmetrical terrestrial gaits. Although bipedal (two-legged) gaits require extensive structural modifications of the body and legs, they still retain the leg-movement sequence of tetrapodal gaits. The basic walking pattern of all tetrapodal vertebrates is left hind leg (LH), left foreleg (LF), right hind leg (RH), right foreleg (RF), and then a cyclic repetition of this sequence, which is equivalent to the slow walking gait of insects but with the middle legs removed. Unlike the insects, however, vertebrates can begin to walk with any of the four legs and not just the posterior pair. The faster symmetrical gaits of vertebrates are obtained by overlapping the leg-movement sequences of the left and right sides in the same manner as insects; for example, an animal can convert a walk to a trot by moving diagonally contralateral legs (those on opposite sides) simultaneously, or to a pace by moving the ipselateral legs (those on the same side) simultaneously. Many other symmetrical gaits occur between the walk and the pace and the trot, which are extreme modifications of the walk.
Cursorial vertebrates
Cursorial (running) vertebrates are characterized by short, muscular upper legs and thin, elongated lower legs. This adaptation decreases the duration of the retractive–protractive cycle, thereby increasing the animal’s speed. Because the leg’s cycle is analogous to the swing of a pendulum, reduction of weight at the end of the leg increases its speed of oscillation. Cursorial mammals commonly use either the pace or the trot for steady, slow running. The highest running speeds, such as the gallop, are obtained with asymmetrical gaits. When galloping, the animal is never supported by more than two legs and occasionally is supported by none. The fastest runners, such as cheetahs or greyhounds, have an additional no-contact phase following hind foot contact.
In cursorial birds and lizards, both of which are bipedal, the feet are enlarged to increase support and the body axis is held perpendicular to the ground, so that the centre of gravity falls between the feet or within the foot-support zone. The running gait is, of course, a simple alternation of left and right legs. In lizards, however, bipedal running must begin with quadrupedal (four-footed) locomotion. As the lizard runs on all four legs, it gradually builds up sufficient speed so that its head end tilts up and back, after which it then runs on only its two hind legs.