River and ocean waters
- Related Topics:
- lake
- seawater
- ocean current
- wave
- ocean
River discharge constitutes the main source for the oceans. Seawater has a more uniform composition than river water. It contains, by weight, about 3.5 percent dissolved salts, whereas river water has only 0.012 percent. The average density of the world’s oceans is roughly 2.75 percent greater than that of typical river water. Of the average 35 parts per thousand salts of seawater, sodium and chlorine make up almost 30 parts, and magnesium and sulfate contribute another four parts. Of the remaining one part of the salinity, calcium and potassium constitute 0.4 part each and carbon, as carbonate and bicarbonate, about 0.15 part. Thus, nine elements (hydrogen, oxygen, sulfur, chlorine, sodium, magnesium, calcium, potassium, and carbon) make up 99 percent of seawater, though most of the 94 naturally occurring elements have been detected therein. Of importance are the nutrient elements phosphorus, nitrogen, and silicon, along with such essential micronutrient trace elements as iron, cobalt, and copper. These elements strongly regulate the organic production of the world’s oceans.
In contrast to ocean water, the average salinity of the world’s rivers is low—only about 0.012 percent, or 120 ppm by weight. Of this salt content, carbon as bicarbonate constitutes 58 parts, or 48 percent, and calcium, sulfur as sulfate, and silicon as dissolved monomeric silicic acid make up a total of about 39 parts, or 33 percent. The remaining 19 percent consists predominantly of chlorine, sodium, and magnesium in descending importance. It is obvious that the concentrations and relative proportions of dissolved species in river waters contrast sharply with those of seawater. Thus, even though seawater is derived in part by the chemical differentiation and evaporation of river water, the processes involved affect every element differently, indicating that simple evaporation and concentration are entirely secondary to other processes.
Water-rock interactions as determining river water composition
Generally speaking, the composition of river water, and thus that of lakes, is controlled by water-rock interactions. The attack of carbon dioxide-charged rain and soil waters on the individual minerals in continental rocks leads to the production of dissolved constituents for lakes, rivers, and streams. It also gives rise to solid alteration products that make up soils or suspended particles in freshwater aquatic systems. The carbon dioxide content of rain and soil waters is of particular importance in weathering processes. The pH of rainwater equilibrated with the atmospheric carbon dioxide partial pressure of 10−3.5 (0.00032) atmosphere is 5.6. In industrial regions, rainwater pH values may be lower because of the release and subsequent hydrolysis of acid gases—namely, sulfur dioxide and nitrogen oxides (NOx) from the combustion of fossil fuels. After rainwater enters soils, its characteristics change markedly. The usual few parts per million of salts in rainwater increase substantially as the water reacts. The upper part of the soil is a zone of intense biochemical activity. The bacterial population near the surface is large, but it decreases rapidly downward. One of the major biochemical processes of the bacteria is the oxidation of organic material, which leads to the release of carbon dioxide. Soil gases obtained above the zone of water saturation may contain 10 to 40 times as much carbon dioxide as the free atmosphere, and in some cases carbon dioxide has been shown to make up 30 percent of the soil gases as opposed to 0.03 percent of the free atmosphere. In addition to the acid effects of carbon dioxide, there is a highly acidic microenvironment created by the roots of living plants. Values of pH as low as 2 have been measured immediately adjacent to root hairs. The combined length of a plant’s root hairs may be several kilometres, so their chemical effects on acidic water are formidable.