oxygen

oxygen (O), nonmetallic chemical element of Group 16 (VIa, or the oxygen group) of the periodic table. Oxygen is a colourless, odourless, tasteless gas essential to living organisms, being taken up by animals, which convert it to carbon dioxide; plants, in turn, utilize carbon dioxide as a source of carbon and return the oxygen to the atmosphere. Oxygen forms compounds by reaction with practically any other element, as well as by reactions that displace elements from their combinations with each other; in many cases, these processes are accompanied by the evolution of heat and light and in such cases are called combustions. Its most important compound is water.

History

Oxygen was discovered about 1772 by a Swedish chemist, Carl Wilhelm Scheele, who obtained it by heating potassium nitrate, mercuric oxide, and many other substances. An English chemist, Joseph Priestley, independently discovered oxygen in 1774 by the thermal decomposition of mercuric oxide and published his findings the same year, three years before Scheele published. In 1775–80, French chemist Antoine-Laurent Lavoisier, with remarkable insight, interpreted the role of oxygen in respiration as well as combustion, discarding the phlogiston theory, which had been accepted up to that time; he noted its tendency to form acids by combining with many different substances and accordingly named the element oxygen (oxygène) from the Greek words for “acid former.”

Occurrence and properties

At 46 percent of the mass, oxygen is the most plentiful element in Earth’s crust. The proportion of oxygen by volume in the atmosphere is 21 percent and by weight in seawater is 89 percent. In rocks, it is combined with metals and nonmetals in the form of oxides that are acidic (such as those of sulfur, carbon, aluminum, and phosphorus) or basic (such as those of calcium, magnesium, and iron) and as saltlike compounds that may be regarded as formed from the acidic and basic oxides, as sulfates, carbonates, silicates, aluminates, and phosphates. Plentiful as they are, these solid compounds are not useful as sources of oxygen, because separation of the element from its tight combinations with the metal atoms is too expensive.

Britannica Quiz

Facts You Should Know: The Periodic Table Quiz

Below −183 °C (−297 °F), oxygen is a pale blue liquid; it becomes solid at about −218 °C (−361 °F). Pure oxygen is 1.1 times heavier than air.

During respiration, animals and some bacteria take oxygen from the atmosphere and return to it carbon dioxide, whereas by photosynthesis, green plants assimilate carbon dioxide in the presence of sunlight and evolve free oxygen. Almost all the free oxygen in the atmosphere is due to photosynthesis. About 3 parts of oxygen by volume dissolve in 100 parts of fresh water at 20 °C (68 °F), slightly less in seawater. Dissolved oxygen is essential for the respiration of fish and other marine life.

Natural oxygen is a mixture of three stable isotopes: oxygen-16 (99.759 percent), oxygen-17 (0.037 percent), and oxygen-18 (0.204 percent). Several artificially prepared radioactive isotopes are known. The longest-lived, oxygen-15 (124-second half-life), has been used to study respiration in mammals.

Allotropy

Oxygen has two allotropic forms, diatomic (O₂) and triatomic (O₃, ozone). The properties of the diatomic form suggest that six electrons bond the atoms and two electrons remain unpaired, accounting for the paramagnetism of oxygen. The three atoms in the ozone molecule do not lie along a straight line.

Are you a student?

Get a special academic rate on Britannica Premium.

Subscribe

Ozone may be produced from oxygen according to the equation:

The process, as written, is endothermic (energy must be provided to make it proceed); conversion of ozone back into diatomic oxygen is promoted by the presence of transition metals or their oxides. Pure oxygen is partly transformed into ozone by a silent electrical discharge; the reaction is also brought about by absorption of ultraviolet light of wavelengths around 250 nanometres (nm, the nanometre, equal to 10⁻⁹ metre); occurrence of this process in the upper atmosphere removes radiation that would be harmful to life on the surface of the Earth. The pungent odour of ozone is noticeable in confined areas in which there is sparking of electrical equipment, as in generator rooms. Ozone is light blue; its density is 1.658 times that of air, and it has a boiling point of −112 °C (−170 °F) at atmospheric pressure.

Ozone is a powerful oxidizing agent, capable of converting sulfur dioxide to sulfur trioxide, sulfides to sulfates, iodides to iodine (providing an analytical method for its estimation), and many organic compounds to oxygenated derivatives such as aldehydes and acids. The conversion by ozone of hydrocarbons from automotive exhaust gases to these acids and aldehydes contributes to the irritating nature of smog. Commercially, ozone has been used as a chemical reagent, as a disinfectant, in sewage treatment, water purification, and bleaching textiles.

Preparative methods

Production methods chosen for oxygen depend upon the quantity of the element desired. Laboratory procedures include the following:

1. Thermal decomposition of certain salts, such as potassium chlorate or potassium nitrate:

The decomposition of potassium chlorate is catalyzed by oxides of transition metals; manganese dioxide (pyrolusite, MnO₂) is frequently used. The temperature necessary to effect the evolution of oxygen is reduced from 400 °C to 250 °C by the catalyst.

2. Thermal decomposition of oxides of heavy metals:

Scheele and Priestley used mercury(II) oxide in their preparations of oxygen.

3. Thermal decomposition of metal peroxides or of hydrogen peroxide:

An early commercial procedure for isolating oxygen from the atmosphere or for manufacture of hydrogen peroxide depended on the formation of barium peroxide from the oxide as shown in the equations.

4. Electrolysis of water containing small proportions of salts or acids to allow conduction of the electric current:

Commercial production and use

When required in tonnage quantities, oxygen is prepared by the fractional distillation of liquid air. Of the main components of air, oxygen has the highest boiling point and therefore is less volatile than nitrogen and argon. The process takes advantage of the fact that when a compressed gas is allowed to expand, it cools. Major steps in the operation include the following: (1) Air is filtered to remove particulates; (2) moisture and carbon dioxide are removed by absorption in alkali; (3) the air is compressed and the heat of compression removed by ordinary cooling procedures; (4) the compressed and cooled air is passed into coils contained in a chamber; (5) a portion of the compressed air (at about 200 atmospheres pressure) is allowed to expand in the chamber, cooling the coils; (6) the expanded gas is returned to the compressor with multiple subsequent expansion and compression steps resulting finally in liquefaction of the compressed air at a temperature of −196 °C; (7) the liquid air is allowed to warm to distill first the light rare gases, then the nitrogen, leaving liquid oxygen. Multiple fractionations will produce a product pure enough (99.5 percent) for most industrial purposes.

The steel industry is the largest consumer of pure oxygen in “blowing” high carbon steel—that is, volatilizing carbon dioxide and other nonmetal impurities in a more rapid and more easily controlled process than if air were used. The treatment of sewage by oxygen holds promise for more efficient treatment of liquid effluents than other chemical processes. Incineration of wastes in closed systems using pure oxygen has become important. The so-called LOX of rocket oxidizer fuels is liquid oxygen; the consumption of LOX depends upon the activity of space programs. Pure oxygen is used in submarines and diving bells.

Commercial oxygen or oxygen-enriched air has replaced ordinary air in the chemical industry for the manufacture of such oxidation-controlled chemicals as acetylene, ethylene oxide, and methanol. Medical applications of oxygen include use in oxygen tents, inhalators, and pediatric incubators. Oxygen-enriched gaseous anesthetics ensure life support during general anesthesia. Oxygen is significant in a number of industries that use kilns.

Chemical properties and reactions

The large values of the electronegativity and the electron affinity of oxygen are typical of elements that show only nonmetallic behaviour. In all of its compounds, oxygen assumes a negative oxidation state as is expected from the two half-filled outer orbitals. When these orbitals are filled by electron transfer, the oxide ion O²⁻ is created. In peroxides (species containing the ion O₂²⁻) it is assumed that each oxygen has a charge of −1. This property of accepting electrons by complete or partial transfer defines an oxidizing agent. When such an agent reacts with an electron-donating substance, its own oxidation state is lowered. The change (lowering), from the zero to the −2 state in the case of oxygen, is called a reduction. Oxygen may be thought of as the “original” oxidizing agent, the nomenclature used to describe oxidation and reduction being based upon this behaviour typical of oxygen.

As described in the section on allotropy, oxygen forms the diatomic species, O₂, under normal conditions and, as well, the triatomic species ozone, O₃. There is some evidence for a very unstable tetratomic species, O₄. In the molecular diatomic form there are two unpaired electrons that lie in antibonding orbitals. The paramagnetic behaviour of oxygen confirms the presence of such electrons.

The intense reactivity of ozone is sometimes explained by suggesting that one of the three oxygen atoms is in an “atomic” state; on reacting, this atom is dissociated from the O₃ molecule, leaving molecular oxygen.

The molecular species, O₂, is not especially reactive at normal (ambient) temperatures and pressures. The atomic species, O, is far more reactive. The energy of dissociation (O₂ → 2O) is large at 117.2 kilocalories per mole.

Oxygen has an oxidation state of −2 in most of its compounds. It forms a large range of covalently bonded compounds, among which are oxides of nonmetals, such as water (H₂O), sulfur dioxide (SO₂), and carbon dioxide (CO₂); organic compounds such as alcohols, aldehydes, and carboxylic acids; common acids such as sulfuric (H₂SO₄), carbonic (H₂CO₃), and nitric (HNO₃); and corresponding salts, such as sodium sulfate (Na₂SO₄), sodium carbonate (Na₂CO₃), and sodium nitrate (NaNO₃). Oxygen is present as the oxide ion, O^2-, in the crystalline structure of solid metallic oxides such as calcium oxide, CaO. Metallic superoxides, such as potassium superoxide, KO₂, contain the O₂^- ion, whereas metallic peroxides, such as barium peroxide, BaO₂, contain the O₂^2- ion.